Oh….. how I have searched for this… For hours… really. And to just come across this by chance today. Duh!
Try the same search for IBM – no…….
My frustration has been expressed on Twitter a number of times – because this is not the way it should be.
I would like to thank Darryl Miles for his post IBM’s customized ESXi 5.0 FAQ’s – and just by chance – I see that he had another post about the VIB’s IBM VIBs for VMware ESXi 4.1U2 and 5.0 – which I had never noticed before.
Thank You!! Thank You!! Thank You!!
1. Package Contents*
This is a VMware ESXi patch for IBM IMM CIM providers. The following CIM providers are included:
> fupb 5.01-7.170 > concretejob 500-2ACE12AUS > filetrans 500-2ACE12AUS > fwupdate 500-2ACE12AUS > hwckvm 500-ESXI01ACN > immpassthru 500-2ACE12AUS > pciinfo 500-PRIVATE > soibms 500-ESXI01ACN > ilfu 500-1.01.20120504 > brcmfwup 500-1.00.20120507 >
2. Hardware Support
The bundle can be applied to the following servers:**
3. OS Support
The bundle can be applied on the following OS platforms:**
VMware ESXi 5.0u1 build 623860
4. Additional Notes
- This IBM bundle only includes the providers created by IBM.
ilfu/brmfuphave no added value without LSI and Broadcom providers installed.
After the bundle is installed on ESXi system, IBM ToolsCenter UpdateXpress System Packs Installer can be used to upgrade ESXi system, or to update firmware of IMM, uEFI, pDSA and FPGA. IBM ToolsCenter Dynamic System Analysis can be used to get information of IBM IMM and other hardware devices.
The links he provided there did not really work for me – IBM’s search engine did not find what I wanted. Here are the [correct links](https://www-947.ibm.com/support/entry/myportal/search_results?sn=spe&q=IBM CIM Providers for VMware vSphere Hypervisor) (you will need an IBM ID to download) – I did not find any differences between the models – so here are the links to each package
This is what is inside the package that you download.
And the bundle itself contains
One last request to IBM. Please make this available as a depot so that it can be added to Update Manager and the CLI tools. PLEASE!!!
Perhaps I should just create my own depot… (but I do not know how legal that is …)